316L Stainless Steel Sheet

You are here: Home -> Products -> Stainless Steel Sheet -> 316L Stainless Steel Sheet
YES Stainless Co.,Ltd. is involved in manufacturer, supplier and exporter a quality range of 316L Stainless Steel Sheet factory in Taiwan, which are designed using high grade raw material that is sourced from our respected vendor base, having years of experience in the market. These are exported at economical prices and are at par with the international quality standards. We have due to our focus on quality of products, customization, process and service levels, and our highly skilled service. If you are interested in any model of our products, please be free to contact us.
  • 316L Stainless Steel Sheet

Model:
316L Stainless Steel Sheet
Specifications
Article316L Cold Rolled stainless steel sheet
StandardAISI, ASTM, GB, JIS
Widthas your requirement
Surface2B / BA
typePlate / Strip / Sheet / Coil
Thickness0.4mm; 0.5mm; 0.6mm; 0.7mm; 0.8mm; 0.9mm; 1.0mm; 1.1mm; 1.2mm; 1.3mm; 1.4mm; 1.5mm; 1.6mm; 1.7mm; 1.8mm; 1.9mm; 2.0mm~4.0mm
Usage2B:Cold rolled, annealed, pickled, skin-passed to give an appropriate luster at final stage, their glossiness and flatness are better than No.2D products. They can be competent for almost all the applications of cold-rolled stainless steel, such as kitchen and bathroom ware, surface polishing, furniture structural parts, etc. BA:Cold-rolled, bright annealed and skin passed products with extremely good surface glossiness and high reflectivity, are used in building decoration, home appliance product and kitchen installation, etc.
Parkingwooden packing or as your requirement
PaymentSmall quantity:T/T at sight, 30% in advance , 70% after receiving the B/L cop ; Large quantity:L/C at sight
Delivery Time15days after received T/T or L/C

SUS316L chemical composition:
ElementsCSiMnPSCrNiMo
Specification0.031.002.000.0450.03016.00-18.0012.00-15.002.00-3.00

For severe environments . Of course, there are many industrial processes that require a higher level of resistance to corrosion than Type 304 can offer.  For these applications, Type 316 is the answer.

Type 316 is also austenitic, non-magnetic, and thermally nonhardenable stainless steel like Type 304. The carbon content is held to 0.08% maximum, while the nickel content is increased slightly. What distinguishes Type 316 from Type 304 is the addition of molybdenum up to a maximum of 3%.

Molybdenum increases the corrosion resistance of this chromium-nickel alloy to withstand attack by many industrial chemicals and solvents, and, in particular, inhibits pitting caused by chlorides. As such, molybdenum is one of the single most useful alloying additives in the fight against corrosion.

By virtue of the molybdenum addition, Type 316 can withstand corrosive attack by sodium and calcium brines, hypochlorite solutions, phosphoric acid; and the sulfite liquors and sulfurous acids used in the paper pulp industry. This alloy, therefore, is specified for industrial equipment that handles the corrosive process chemicals used to produce inks, rayons, photographic chemicals, paper, textiles, bleaches, and rubber. Type 316 is also used extensively for surgical implants within the hostile environment of the body.

Type 316 is the main stainless used in the marine environment, with the exception of fasteners and other items where strength and wear resistance are needed, then Type 304 (18-8) is typically used.

316L has lower carbon allowed. It will be less susceptible to sensitization, a condition caused when carbon combines with chromium around the grain boundaries, thereby depleting the grain boundary areas of chromium. That would make the grain boundary areas less corrosion resistant. Sensitization occurs with heating into the 800 F to 1300 F region, so it's a welding or annealing problem.The 316L will also be softer than straight 316, again due to the lower carbon.


Enquiry Now +Enquiry Now -
The whole staff will endeavor to provide more high level 316L Stainless Steel Sheet and full-hearted service for our customers to engage in the expand tide of industry. The products are offered to our clients in various shapes, sizes, colors and finishes to suit the demands of our clients.
Italian, Italiano